Wimpernwelle Power Pad 24 Treatment Lash Lifting Kit

This Kit Contains :
24 x Gel 1 Lift
24 x ml Gel 2 Fix
1 Brush
2 POWER PAD Glue - 2nd generation,
2 Special Glue
1 medical Tape
3 Packages POWER PAD extra
(1 x size 1 extra, 1 x size 2 extra, 1 x size 3 extra)

1. Use a Makeup pad to carefully remove eye make-up and mascara.
2. Degrease eyelashes and eyelid using Wimpernwelle Sodium Chloride Solution.
3. Comb the lashes using a lash spoolie.
4. Choose a suitable Power Pad.
5. Take now one Power Pad and coat its complete back side thinly with the Power Pad Glue.
6. Check the position of the fixed Power Pads, the eyelid margin must be clearly visible. Both Powe Pads should be fixed in an identical position and the lower rim of the pad must still adhere to the eyelid.
7. Apply the Power Pad Glue above the horizontal marking line of the Power Pad across its complete length a line as wide as the wooden stick.
8. By using a wooden stick or lash tool, slowly and evenly spread 3-4 lashes at a time straight from their roots upwards into the glue.
9. Coat the non-adherent lash tips with the Special Glue and press it for 5 seconds onto the Power Pad.
10. Apply Gel 1 (Lift) generously with an applicator, stroke the gel upwards. Leave Gel 1 for 12 Minutes (if needed can be left for 15-18 minutes).
11. Remove Gel 1 with a dry makeup pad or cotton bud.
12. Apply Gel 2 (Fix) just like gel 1 and leave for 8 minutes.
13. Take off Gel 2 with a dry makeup pad. Now moisten a Makeup pad with Wimpernwelle glue and roll remover.
14. Stretch the lid and carefully roll the rolls downwards with the moistened pad. Wipe over the eyelid and eyelashes to remove any glue residue.
15. Tint the eyelashes immediately after the Wimpernwelle Lash Tinting.
16. Finish with Wimpernwelle Lamination Keratin Fluid which will help replenish damaged lashes, makes them stronger and give a lustrous finish. Apply with a micro brush, cover the lashes generously from above and below.

Ammonia, Thiolycolate, Hydrogen Peroxide.