This Kit Contains : 24 x Gel 1, 24 x Gel 2, 1 Brush.
1. Use a Makeup pad to carefully remove eye make-up and mascara.
2. Degrease eyelashes and eyelid using Wimpernwelle Sodium Chloride Solution.
3. Comb the lashes using a lash spoolie.
4. Select which size lash roller is suitable for your client. (The more lift you want the smaller the roller).
5. Fix the roller to the eyelid.
6. Using an applicator begin to raise and gently press the eyelashes one by one from the outer corner to the inner corner onto the self-sticking eyelash roll.
7. Should any lashes not adhere apply a small amount of Wimpernwelle Special Glue, to stick the lash to the roller.
8. Apply Gel 1 (Lift) generously with an applicator, stroke the gel upwards. Leave Gel 1 for 12 Minutes (if needed can be left for 15-18 minutes).
9. Remove Gel 1 with a dry makeup pad or cotton bud.
10. Apply Gel 2 (Fix) just like gel 1 and leave for 8 minutes.
11. Take off Gel 2 with a dry makeup pad. Now moisten a Makeup pad with Wimpernwelle glue and roll remover.
12. Stretch the lid and carefully roll the rolls downwards with the moistened pad. Wipe over the eyelid and eyelashes to remove any glue residue.
13. Tint the eyelashes immediately after the Wimpernwelle Lash Tinting.
14. Finish with Wimpernwelle Lamination Keratin Fluid which will help replenish damaged lashes, makes them stronger and give a lustrous finish. Apply with a micro brush, cover the lashes generously from above and below.
Ammonia, Thiolycolate, Hydrogen Peroxide.